Sherwood R-963 - Manual (Page 49)

ENGLISH
49
Each time these buttons are pressed, the channel level can
be adjusted within the range of -15~+15 dB.
Each time these buttons are pressed, “ ” is moved to the
corresponding channel.
Note :
Depending on the speaker settings such as “None” and
“No”, center, surround, surround back or subwoofer
channel will not be selected.
OFF
OSD POWER
MAIN PAGE FAV
MUTE
CH/ SET VOL
RETURN
DISC DISP
MI
ROOM 2
1 STEREO
7.1 SURR
CH
2 3
4 5 6
7 8 9
0 ENT
M2 M3
AUTO DSP
RNC-500
OFF
OSD POWER
MAIN PAGE FAV
MUTE
CH/ SET VOL
RETURN
DISC DISP
MI
ROOM 2
1 STEREO
7.1 SURR
CH
2 3
4 5 6
7 8 9
0 ENT
M2 M3
AUTO DSP
RNC-500
C H L E V E L T R I M
R E T U R N : B a c k , : S e l e c t
F L : - - - - - - - - - - - - : 0 dB
C : - - - - - - - - - - - - : 0 dB
F R : - - - - - - - - - - - - : 0 dB
S R : - - - - - - - - - - - - : 0 dB
B R : - - - - - - - - - - - - : 0 dB
B L : - - - - - - - - - - - - : 0 dB
S L : - - - - - - - - - - - - : 0 dB
S W : - - - - - - - - - - - - : 0 dB
Press the CURSOR UP( )/DOWN( ) buttons to select the desired channel.
1
Press the CURSOR LEFT( )/RIGHT( ) buttons to adjust the level of the selected channel as desired.
2
Repeat the above steps and to adjust each channel level until the sound level of each speaker is heard
to be equally loud.
3
SETTING THE CH LEVEL TRIM