Sherwood R-963 - Manual (Page 32)

ENGLISH
32
OTHER FUNCTIONS
This function compresses the dynamic range of
previously specified parts of the Dolby Digital sound
track(with extremely high volume)to minimize the
difference in volume between the specified and non-
specified parts.
This makes it easier to hear all of the sound track
when watching movies at night at low levels.
When the digital signals from the Dolby Digital
program source are input.
Each time this button is pressed, the mode changes
and disappears in 3 seconds as follows:
DYNAMIC : 0.0 : Off
DYNAMIC : 0.5 : Low compression
DYNAMIC : 1.0 : High compression
In some Dolby Digital software, this function may
not be available.
Compressing the dynamic range (Dolby Digital sources only)
The sleep timer allows the system to continue to
operate for a specified period of time before
automatically shutting off.
To set the receiver to automatically turn off after the
specified period of time.
Each time this button is pressed, the sleep time
changes and disappears in 3 seconds as follows:
10 20 30 60 90 OFF
Unit : minutes
While operating the sleep timer, “SLEEP” lights up.
When the sleep time is selected, all display panels of
Sherwood components connected by the DIGI LINK
III are dimly lit.
Each time this button is pressed, the brightness of
all fluorescent displays of Sherwood components
connected by the DIGI LINK III changes together
as follows:
ON dim OFF
In the display OFF mode, pressing any button will
restore the display ON mode.
Operating the sleep timer Adjusting the brightness of the
fluorescent displays
POWER
OFF
OSD
OFF
OSD POWER
MAIN PAGE FAV
MUTE
CH/ SET VOL
RETURN
DISC DISP
MI
ROOM 2
1 STEREO
7.1 SURR
CH
2 3
4 5 6
7 8 9
0 ENT
M2 M3
AUTO DSP
RNC-500
DISC
DISP
DYNAMIC
RANGE