Siemens E-110-I - Manual (Page 10)

SIEMENS ADSL E-110_E-110-I user manual
Rear PanelRear Panel
The following figure illustrates the rear panel of your ADSL Router.
ADSL Connects the device to an ADSL telephone jack using the supplied cable.
USB Connects the device to the USB port on your PC.
Ethernet Connects the device to your PC's Ethernet port, or to the uplink port on your LAN's hub,
using the cable provided.
Reset Button Reset to factory defaults.
To reset the device to factory defaults, you don’t need to power off the device. Just
push a paper clip into the hole. Press down the button for 3 times and then release.
Then wait for the device to finish boot-up.
9V 1A Connects to the supplied power converter cable.
4 Rev:01_040220