Siemens E-110-I - Manual (Page 48)

SIEMENS ADSL E-110_E-110-I user manual
2. To add an IP address pool, click [Add]. The DHCP Server Pool - Add page displays.
Field Description
Start / End IP Addresses Specify the lowest and highest addresses in the pool.
Mac Address (optional)
Allows you to assign a specific IP address to a specific computer,
identified by this MAC address. If this is the case, you must have specified
the same IP address in both the Start/End IP Address fields.
Netmask Specifies the associated subnet mask of the IP address in this range.
Domain Name (optional) The domain name to be used by DHCP clients.
Gateway Address
The address of the default gateway. Typically, it is the device’s LAN port IP
address.
DNS Address (optional) The IP address of the DNS Server . Its typically located with your ISP.
SDSN...SWINS Address
(optional)
The IP addresses of devices that perform various services for DHCP
clients.
3. Click [Apply]. A confirmation page displays to indicate that the pool has been added successfully.
4. Click [Close] to return to the DHCP Server Configuration page.
Part 2. Enabling DHCP Server Mode
1. Select Lan > DHCP Mode.
2. From the DHCP Mode drop-down list, select DHCP Server and then click [Apply].
A page gives a receipt for the changes.
3. Select Admin > Commit & Reboot and click [Save] to save your changes to permanent storage.
42 Rev:01_040220