Siemens E-110-I User Manual

Page 63

Advertising
background image

Chapter 4: Advanced Configuration

Field

Description

Max Half open TCP Conn. Sets the percentage of concurrent IP sessions that can be in the

half-open state. In ordinary TCP communication, packets are in the

half-open state only briefly as a connection is being initiated; the state

changes to active when packets are being exchanged, or closed when

the exchange is complete. TCP connections in the half-open state can

use up the available IP sessions.
If the percentage is exceeded, then the half-open sessions will be closed

and replaced with new sessions as they are initiated.

Max ICMP Conn.

Sets the percentage of concurrent IP sessions that can be used for ICMP

messages.
If the percentage is exceeded, then older ICMP IP sessions will be
replaced by new sessions as the are initiated.

Max Single Host Conn.

Sets the percentage of concurrent IP session that can originate from a
single computer. This percentage should take into account the number

of hosts on the LAN.

Log Destination

Specifies how attempted violations of the firewall settings will be
tracked. Records of such events can be sent via Ethernet to be handled

by a system utility Ethernet to (Trace) or can E-mailed to specified

administrators.

E-Mail ID of Admin 1/2/3

Specifies the E-mail addresses of the administrators who should receive
notices of any attempted firewall violations. Type the addresses in

standard Internet E-mail address format, e.g., [email protected].
The E-mail message will contain the time of the violation, the source

address of the computer responsible for the violation, the destination IP

address, the protocol being used, the source and destination ports, and

the number violations occurring the previous 30 minutes. If the ICMP

protocol were being used, then instead of the source and destination

ports, the E-mail will report the ICMP code and type.

3. Click

[Apply]. A page gives a receipt for the changes.

4. Select

Admin > Commit & Reboot and click [Save] to save your changes to permanent storage.

Rev:01_040220

57

Advertising
This manual is related to the following products: