Siemens E-110-I - Manual (Page 37)

Chapter 3: Configuration
For Windows 2000
1. From the Start menu, point to Programs > Accessories and then click Command Prompt.
2. Type
ipconfig
at prompt. Then you will see the IP information from DHCP server.
3. If you want to get a new IP address, type
ipconfig /release
to release the previous IP address and
then type
ipconfig /renew
to get a new one.
For Windows XP
1. From the Start menu, point to Programs > Accessories and then click Command Prompt.
2. Type
ipconfig
at prompt. Then you will see the IP information from DHCP server.
3. If you want to get a new IP address, type
ipconfig/ release
to release the previous IP address and
then type
ipconfig/ renew
to get a new one.
Rev:01_040220 31