Sony HDW-S280 - Manual (Page 27)

27
Setting Reference Video Signals
Chapt
er
3
P
rep
ar
at
ions
3-5 Setting Reference
Video Signals
This section explains how reference video signals for
synchronization of video output and servo lock are selected
according to settings made with this unit.
Reference video signal for video output
Output video signals are synchronized with the signal
generated by the internal reference video signal generator.
The internal reference video signal generator can be
synchronized with an external reference video signal or
with an input video signal (HD SDI input).
Reference video signal for servo lock
Servo is locked with an external reference video signal, an
input video signal (HD SDI input), or the signal generated
by the internal reference video signal generator.
As shown in the following table, a signal for
synchronization of the internal reference video signal
generator and a reference video signal for servo lock are
selected according to the setting for setup menu items 309
and 334, the setting for OUT REF on the P2 VIDEO page
of the function menu, and the operating mode of the unit.
For details on setup menu item 309, see page 68, and for
item 334, see page 68.
For details on the OUT REF settings, see “3-7 Basic
Operations of the Function Menu” on page 31.
EE: E-E mode
PB: Playback (Normal playback, jog mode, shuttle mode, stop mode)
ASSEMBLE: Assemble edit mode (ASSEMBLE on the HOME page of the
function menu is set to ON.)
REC: Recording
If the signal selected on the menu is not
being input
The servo reference video signal and internal reference
signal generator synchronize as follows.
When INPUT is selected for the sync signal
If a video signal is not being input, the servo reference
video signal and internal reference signal generator
synchronize with an external reference video signal.
OUT REF
setting Item 309
setting Item 334
setting Operation
mode Reference
signal
-- EXT NORMAL EE REF
PB
ASSEMBLE
REC
INPUT EE IPUT
PB REF
ASSEMBLE
REC
REF AUTO1 NORMAL EE
PB
ASSEMBLE
REC INPUT
INPUT EE
PB REF
ASSEMBLE
REC INPUT
INPUT -- EE
PB
ASSEMBLE
REC
REF AUTO2 NORMAL EE REF
PB
ASSEMBLE INPUT
REC
INPUT EE
PB REF
ASSEMBLE INPUT
REC
INPUT -- EE
PB
ASSEMBLE
REC