Appendixes, Specifications – Sony HDW-S280 User Manual
Page 86
86
Specifications
Ap
pen
dix
e
s
Appendixes
Specifications
General
Recording format
HDCAM
Power requirements
100 to 240 V AC, 50/60 Hz
12 V DC
Power consumption
AC operation: approx. 0.8A, 80 W
Peak inrush current
(1) Power ON, current probe method:
55 A (240 V), 15 A (100 V)
(2) Hot switching inrush current, measured in
accordance with European standard EN55103-1:
10 A (230 V)
Operating temperature
5°C to 40°C (41°F to 104°F)
Storage temperature
−20°C to +60°C (−4°F to +140°F)
Operating humidity
25% to 80%
Mass
approx. 6.0 kg (13 lb 4 oz)
Dimensions (w/h/d)
210
×
132 x 425 mm
(8 3/8
Ч
5 1/4
Ч
16 3/4 inches)
Tape transport system
Tape speed
HDCAM
96.7 mm/s (59.94i, 29.97PsF)
80.7 mm/s (50i, 25PsF)
77.4 mm/s (24PsF, 23.98PsF)
Betacam SX 59.6 mm/s
Analog Betacam
118.6 mm/s (525/59.94)
101.5 mm/s (625/50)
HDCAM record/playback time
40 minutes with BCT-40HD (59.94i,
29.97PsF)
48 minutes with BCT-40HD (50i, 25PsF)
50 minutes with BCT-40HD (24PsF,
23.98PsF)
Betacam SX playback time
62 minutes with BCT-62SXA
Betacam SP playback time
30 minutes with BCT-30MA (525/59.94)
36 minutes with BCT-30MA (625/50)
Analog Betacam playback time
30 minutes with BCT-30G (525/59.94)
36 minutes with BCT-30G (625/50)
Rewind time
3 minutes or less with BCT-40HD
Fast forward time
4 minutes or less with BCT-40HD
Search speed
Shuttle mode
Still to approx.
±10 times normal
playback speed (59.94i, 50i)
Jog mode
Still to
±1.5 times normal playback
speed
Servo lock time HDCAM, SX, SP: 1 second or less (from
standby on)
Load/unload time
7 seconds or less
Recommended tapes
HDCAM cassettes (S only):
BCT-6HD/12HD/22HD/32HD/
40HD
Betacam SX cassettes (S only)
(for playback only)
Betacam SP cassettes (S only)
(for playback only)
Betacam cassettes (S only)
(for playback only)
Digital video system
Digital video signal format
Sampling frequency
HD
Y: 74.25 MHz
R-Y/B-Y: 37.125 MHz
SD
Y: 13.5 MHz
R-Y/B-Y: 6.75 MHz
Quantization
8 bits/sample
Compression
Coefficient recording system
Channel coding S-I-NRZI PR-IV
Error correction Reed-Solomon code
1% or less