Sony HDW-S280 - Manual (Page 89)

89
Specifications
App
end
ix
e
s
• For customers in the United Kingdom
Part No. 1-782-165-11
Plug holder 3-613-640-01
• For customers in European countries other than the
United Kingdom
Part No. 1-782-164-11
Plug holder 3-613-640-01
Design and specifications are subject to change without
notice.
Relation between HKDV-900 setting items
and setup menu of this unit
a) Valid for output only when VIP.PROC on the P1 PROCS page in function
menu is set to MENU.
b) Select whether to set DC or UC with menu item 212 (VIDEO REMOTE
CONTROL SELECT). When both are selected (menu item 212 is U&D),
both of the corresponding menu settings are made, but this unit's answer
values and unity values are the DC values.
HD: HDSDI output during HDCAM playback
DC: Down-converted SD (D1 SDI/COMPOSITE) output
during HDCAM playback
SD: SD (D1 SDI/COMPOSITE) output during SD format
playback
UC: Up-converted HDSDI output during SD format
playback
HD video output phase settings
The HD video output phase is set from the maintenance
menu.
For details on the maintenance menu, refer to the
maintenance manual.
• The SDSDI (D1) output and component/composite
outputs have the same phase.
• The phase of the HD video output and SD video output
is fixed to the same phase of the reference signal when
up-converted.
To prevent electromagnetic interference from portable
communications devices
The use of portable telephones and other communications devices near
this unit can result in misoperations and interference with audio and
video signals.
It is recommended that portable communications devices near this unit
be powered off.
HKDV-900/503
setting items Setup menu items of this unit
HD Master 740: MASTER LEVEL (HD) a)
HD Y 741: Y LEVEL (HD)
a)
HD Pb 742: Pb LEVEL (HD)
a)
HD Pr 743: Pr LEVEL (HD)
a)
HD Setup 745: SETUP LEVEL (HD)
a)
HD Sync Phase 746: SYNC PHASE (HD/UC) a)
HD Fine 747: FINE (HD/UC) a)
D1 Master No corresponding menu item
D1 Y No corresponding menu item
D1 B-Y No corresponding menu item
D1 R-Y No corresponding menu item
D2 VIDEO 715: VIDEO GAIN CONTROL (HD/DC/SD/UC) a)
D2 CHROMA 716: CHROMA GAIN CONTROL
(HD/DC/SD/UC)
a)
D2 HUE 717: CHROMA PHASE CONTROL
(HD/DC/SD/UC)
a)
SETUP 718: SETUP LEVEL (BLACK LEVEL)
(HD/DC/SD/UC)
a), c)
SD Sync Phase 719: SYSTEM PHASE SYNC (DC/SD)
SD Fine 720: SYSTEM PHASE SC (DC/SD)
CROSS COLOR 934: CROSS COLOR (DC)
H CROP
POSITION 932: H CROP POSITION (DC)/
951: H CROP POSITION (UC)
b)
DETAIL GAIN 935: DETAIL GAIN (DC)/
954: DETAIL GAIN (UC)
b)
LIMITTER 936: LIMITER (DC)/
955: LIMITER (UC)
b)
CRISP 937: CRISP THRESHOLD (DC)/
956: CRISP THRESHOLD (UC)
b)
DEPEND 938: LEVEL DEPEND THRESHOLD (DC)/
957: LEVEL DEPEND THRESHOLD (UC)
b)
FREQUENCY 939: H DETAIL FREQUENCY (DC)/
958: H DETAIL FREQUENCY (UC)
b)
H/V RATIO 940: H/V RATIO (DC)/
959: H/V RATIO (UC)
b)
GAMMA 941: GAMMA LEVEL (DC)/
960: GAMMA LEVEL (UC)
b)
CROP 930: CONVERTER MODE (DC)/
950: CONVERTER MODE (UC)
b)
LETTER BOX 930: CONVERTER MODE (DC)/
950: CONVERTER MODE (UC)
b)
SQUEEZE 930: CONVERTER MODE (DC)/
950: CONVERTER MODE (UC)
b)
Item No. Item Name Settings
M3 M3A: OUTPUT
PHASE SELECT
M3A0: HD
PHASE SEL Select the HD video output signal
phase with respect to the reference
signal: 0H or -90H (HD) advanced.
[0H]: Output in sync with the
reference signal.
−90H: Output with the phase
advanced by −90H (HD) to the
reference signal.
Note
HKDV-900/503
setting items Setup menu items of this unit