SMC Networks SMC2552W-G2-17 - Manual (Page 110)

Radio Interface
6-63
6
• Wi-Fi Protected Access (WPA or WPA2)page 6-73
Both WEP and WPA security settings are configurable separately for each virtual
access point (VAP) interface. MAC address filtering, and RADIUS server settings
are global and apply to all VAP interfaces.
The security mechanisms that may be employed depend on the level of security
required, the network and management resources available, and the software
support provided on wireless clients.
A summary of wireless security considerations is listed in the following table.
Table 6-2. Wireless Security Considerations
Security
Mechanism
Client Support Implementation Considerations
WEP Built-in support on all 802.11g
devices
• Provides only weak security
• Requires manual key management
WEP over 802.1X Requires 802.1X client support
in system or by add-in software
(support provided in Windows
2000 SP3 or later and Windows
XP)
• Provides dynamic key rotation for improved WEP
security
• Requires configured RADIUS server
• 802.1X EAP type may require management of
digital certificates for clients and server
MAC Address
Filtering
Uses the MAC address of client
network card
• Provides only weak user authentication
• Management of authorized MAC addresses
• Can be combined with other methods for improved
security
• Optionally configured RADIUS server
WPA over 802.1X
Mode
Requires WPA-enabled system
and network card driver
(native support provided in
Windows XP)
• Provides robust security in WPA-only mode
(i.e., WPA clients only)
• Offers support for legacy WEP clients, but with
increased security risk (i.e., WEP authentication
keys disabled)
• Requires configured RADIUS server
• 802.1X EAP type may require management of
digital certificates for clients and server
WPA PSK Mode Requires WPA-enabled system
and network card driver
(native support provided in
Windows XP)
• Provides good security in small networks
• Requires manual management of pre-shared key