Rts-threshold, Rts-threshold 7-103 – SMC Networks SMC2552W-G2-17 User Manual

Page 240

Advertising
background image

Wireless Interface Commands

7-103

7

Syntax

fragmentation-length

<length>

length

- Minimum packet size for which fragmentation is allowed.

(Range: 256-2346 bytes)

Default Setting

2346

Command Mode

Interface Configuration (Wireless)

Command Usage

• If the packet size is smaller than the preset Fragment size, the packet will

not be segmented.

• Fragmentation of the PDUs (Package Data Unit) can increase the reliability

of transmissions because it increases the probability of a successful
transmission due to smaller frame size. If there is significant interference
present, or collisions due to high network utilization, try setting the fragment
size to send smaller fragments. This will speed up the retransmission of
smaller frames. However, it is more efficient to set the fragment size larger
if very little or no interference is present because it requires overhead to
send multiple frames.

Example

rts-threshold

This command sets the packet size threshold at which a Request to Send (RTS)
signal must be sent to the receiving station prior to the sending station starting
communications.

Syntax

rts-threshold

<threshold>

threshold

- Threshold packet size for which to send an RTS.

(Range: 0-2347 bytes)

Default Setting

2347

Command Mode

Interface Configuration (Wireless)

Command Usage

• If the threshold is set to 0, the access point always sends RTS signals. If set

Enterprise AP(if-wireless g)#fragmentation-length 512
Enterprise AP(if-wireless g)#

Advertising
This manual is related to the following products: