SMC Networks SMC2552W-G2-17 - Manual (Page 113)

System Configuration
6-66
6
Note: If you choose to configure RADIUS MAC authentication together with 802.1X, the
RADIUS MAC address authentication occurs prior to 802.1X authentication. Only
when RADIUS MAC authentication succeeds is 802.1X authentication performed.
When RADIUS MAC authentication fails, 802.1X authentication is not performed.
Enabling the VAPs
Before enabling the Virtual Access Point (VAP) radio interfaces, first configure all of
the relevant raido settings (see “You must first enable VAP interface 0 before the
other interfaces can be enabled.” on page 6-48.)
After you have configured the radio settings, select Security under Radio G, set an
SSID to identify the wireless network service provided by each VAP you want to use,
and then click Apply to save your settings.
WPA2 Pre-Shared
Key only
Interface Detail Settings:
Authentication: WPA2-PSK
Encryption: Enable
WPA Clients: Required
Cipher Suite: AES-CCMP
802.1x: Disable
WPA Pre-shared Key Type: Hexadicmal or
Alphanumeric
Enter a WPA Pre-shared key
Local or Disabled No
802.1x WPA-WPA2
Mixed Mode
Interface Detail Settings:
Authentication: WPA-WPA2-mixed
Encryption: Enable
WPA Clients: Required
Cipher Suite: TKIP
802.1x: Required
Set 802.1x key refresh and reauthentication rates
Local or Disabled Yes
WPA-WPA2 Mixed
Mode Pre-Shared Key
Interface Detail Settings:
Authentication: WPA-WPA2-PSK-mixed
Encryption: Enable
WPA Clients: Required
Cipher Suite: TKIP
802.1x: Disable
WPA Pre-shared Key Type: Hexadicmal or
Alphanumeric
Enter a WPA Pre-shared key
Local or Disabled No
a. The configuration summary does not include the set up for MAC authentication
(see page 4-15) or RADIUS server (see page 2-9).
b. The configuration of RADIUS MAC authentication together with 802.1x WPA or
WPA Pre-shared Key is not supported.
c. RADIUS server required only when RADIUS MAC authentication is configured.
Table 6-3. Security Combinations
Client Security
Combination
Configuration Summary
a MAC
Authentication
b
RADIUS
Server