SMC Networks SMC2552W-G2-17 - Manual (Page 191)

Command Line Interface
7-54
7
show snmp
This command displays the SNMP configuration settings.
Command Mode
Exec
Example
Enterprise AP#show snmp
SNMP Information
==============================================
Service State : Disable
Community (ro) : ********
Community (rw) : ********
Location : R&D 2
Contact : David
EngineId :80:00:07:e5:80:00:00:27:04:00:00:00:08
EngineBoots:3
Trap Destinations:
1: 0.0.0.0, Community: *****, State: Disabled
2: 0.0.0.0, Community: *****, State: Disabled
3: 0.0.0.0, Community: *****, State: Disabled
4: 0.0.0.0, Community: *****, State: Disabled
systemUp Enabled systemDown Enabled
radiusServerChanged Enabled configFileVersionChanged Enabled
sntpServerFail Enabled dot11StationAssociation Enabled
dot11StationReAssociation Enabled dot11StationAuthentication Enabled
dot11StationRequestFail Enabled dot1XMacAddrAuthSuccess Enabled
dot1XMacAddrAuthFail Enabled dot1XAuthNotInitiated Enabled
dot1XAuthSuccess Enabled dot1XAuthFail Enabled
localMacAddrAuthSuccess Enabled localMacAddrAuthFail Enabled
iappStationRoamedFrom Enabled iappStationRoamedTo Enabled
iappContextDataSent Enabled dot1XSuppAuthenticated Enabled
wirelessExternalAntenna Enabled dot11InterfaceAFail Enabled
dot11InterfaceGFail Enabled
=============================================
Enterprise AP#