Sony XAV-W1 - Manual (Page 43)

43
External Video Setting
* When a device is connected to BUS CONTROL IN, “Sony BUS” appears instead of “AUX 3,” and only options
“Video” and “Audio” are selectable.
Sound/speaker settings — Sound
Select “SETUP” c “Sound” c the desired category c the desired item c the desired option. For details
on this procedure, see “Basic setup operation” on page 40.
Follow the page reference for details. “z” indicates the default setting.
Sound Setting
Item Option Purpose Unit status
Input (page 48)
Activates the video input from
the connected back camera/
navigation device.
OFF (z) To deactivate the input.
Any status.
Navigation To show the picture from
the navigation and output
the sound from the current
source.
Back Camera To show the picture from
the back camera when the
back lamp lights up (or the
shift lever is set to the R
(reverse) position).
Color System (page 48)
Changes the color system
according to the connected
back camera/navigation
device.
(SECAM is not supported.)
PAL To set to PAL.
NTSC (z) To set to NTSC.
Back Camera Setting
(page 49) – –
Item Option Purpose Unit status
EQ7 (page 29) OFF (z) To cancel the equalizer
curve.
During playback/
radio reception.*
1
Xplod, Vocal,
Edge, Cruise,
Space, Gravity,
Custom To select the equalizer
curve; customize the
equalizer curve.
Dolby Pro Logic II (page 31)
Outputs 2-channel sources in
multi-channel.
OFF (z) To deactivate the Pro Logic
II mode.
During DVD/
VCD/CD/MP3
playback/radio
reception.*
1
Music To create deep, wide sound
for stereo audio recordings.
Movie To enhance the sound field
of stereo television shows
and all programs encoded
in Dolby Surround.
continue to next page t