SUPER MICRO Computer X7SBL-LN1/LN2 - Manual (Page 11)

Chapter 1: Introduction
1-5
Jumpers Description Default Setting
JI
2
C1/JC
2
C2 SMB to PCI Slots Open/Open (Disabled)
JPF Power Force On Pins 1-2 (Reset)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1/JPL2 Gigabit LAN 1/2 Enable Pins 1-2 (Enabled)
JPUSB1/JPUSB2 USB 0-1 Enable/USB 2-6 Enable Pins 1-2 (Enabled)
JP3 (Optional) Trusted Platform Module Enable Pins 1-2 (Enabled)
JWD Watch Dog Timer Out Pins 1-2 (Reset)
Connectors Description
COM1 COM Port/Serial Port 1 Connector
COM2 COM Port/Serial Port 2 Connector (J13)
Fans 1-6 Fan 6: CPU Fan, Fan 1-5: Chassis Fan Headers
JBT1 CMOS Clear
JF1 FP Control Panel Header
JL1 Chassis Intrusion Header
JLED Onboard Power LED Indicator
JPR1 Redundant Power Alarm Reset
JPW2 12V 8-pin Power Connector (Required)
JWOL Wake-on-LAN Header
JWOR Wake-on-Ring Header
J9 Speaker Header
KB/MS PS/2 Keyboard/Mouse
LAN1/LAN2 Ethernet RJ45 (Gigabit LAN) Connectors (LAN 2 only available on the
LN2 model)
LE1 Standby Power LED Indicator
PCI Slot PCI 33 MHz
PCI-E Slot PCI-Express x4
PW Fault Power Fault Header
PW SMB Power SMBus
SATA 0-5 SATA Headers
SGPIO 1-2 Serial General Purpose Input Output Headers
SIM IPMI SIM 1U IPMI Slot
Slot 6 + SBX PCI-Express x8 slot + SBX: PCI 32-bit 33MHz slot
USB 0-1 Back Panel Universal Serial Bus Ports
USB 2-5 Front Panel Accessible USB Headers
USB 6 Front Panel USB Connector
VGA Video Graphics Connector
X7SBL-LN1/LN2 Quick Reference