SUPER MICRO Computer X7SBL-LN1/LN2 - Manual (Page 66)

4-10
X7SBL-LN1/LN2 User's Manual
Power Loss Control
This setting allows you to choose how the system will react when power returns
after an unexpected loss of power. The options are Stay Off, Power On, and
Last State.
Watch Dog
Select Enabled to automatically reset the system if the system is not active for
more than 4 minutes. The options are Enabled and Disabled.
Summary Screen
This setting allows you to Enable or Disable the summary screen which displays
the system confi guration during bootup.
Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This is a display that indicates the speed of the installed processor.
Frequency Ratio (*Available when supported by the CPU.)
The feature allows you to set the internal frequency multiplier for the CPU. The
options are: Default, x6, x7, x8, x9, x10 and x11.
Frequency High Ratio (*Available when supported by the CPU.)
The feature allows you to set the high ratio internal frequency multiplier for the
Intel SpeedStep CPUs. The settings are: Default, [X6] to [X11], [X12] to [X27].
Note: If a wrong ratio that is not supported by the CPU is selected, the system
may hang. If this happens, clear the CMOS to recover the system.