SUPER MICRO Computer X7SBL-LN1/LN2 - Manual (Page 21)

Chapter 2: Installation
2-3
Triangle
Socket Key
(Socket Notch)
Bottom Center Edge
Top Center Edge
CPU Key (semi-
circle cutout)
below the circle.
CPU Pin1
Corner with a
triangle cutout
golden dot
1. Press the load lever to release
the load plate, which covers the CPU
socket, from its locking position.
2. Gently lift the load lever to open the
load plate.
PnP Cap on
top of the
Load Plate
Load Plate
(with PnP Cap
attached)
3. Use your thumb and your index fi n-
ger to hold the CPU at the top center
edge and the bottom center edge of
the CPU.
4. Align CPU Pin1 (the CPU corner
marked with a triangle) against the
socket corner that is marked with a
triangle cutout.
Installation of the LGA 775 Processor