SUPER MICRO Computer X7SBL-LN1/LN2 - Manual (Page 82)

4-26
X7SBL-LN1/LN2 User's Manual
Supervisor Password Is:
This item indicates if a supervisor password has been entered for the system. Clear
means such a password has not been used and Set means a supervisor password
has been entered for the system.
User Password Is:
This item indicates if a user password has been entered for the system. Clear
means such a password has not been used and Set means a user password
has been entered for the system.
Set Supervisor Password
When the item Set Supervisor Password is highlighted, hit the <Enter> key. When
prompted, type the Supervisor's password in the dialogue box to set or to change
supervisor's password, which allows access to the BIOS.
Set User Password
When the item Set User Password is highlighted, hit the <Enter> key. When
prompted, type the user's password in the dialogue box to set or to change the
user's password, which allows access to the system at boot-up.
Fixed Disk Boot Sector
Select Normal to enable the function of Write-Protect to protect the boot sector
on the hard drives against viruses.
Password on Boot
When this feature is set to Enabled, a password is required for a user to enter the
system at bootup. The options are Enabled (password required) and Disabled
(password not required).