SUPER MICRO Computer X7SBL-LN1/LN2 - Manual (Page 65)

Chapter 4: BIOS
4-9
POST Errors
Use the setting to Pause and Display SETUP entry or resume boot prompt if
error occurs on boot disabled. The options are Enabled and Disabled.
ACPI Mode
Use the setting to determine whether you want to use the ACPI (Advanced
Confi guration and Power Interface) power management on your system. The
options are Yes and No.
Power Button Behavior
If set to Instant-Off, the system will power on or power off immediately as soon as
you hit the power button. The options are Instant-Off and 4-second Override.
Resume On Modem Ring
Select On to “wake your system up” when an incoming call is received by your
modem. The options are On and Off.
Resume On PME#
Select On to “wake your system up” from the PME#. The options are On and
Off.
PS2 Keyboard (KB)/Mouse Wake Up
Select Enable to “wake your system up” from the S1/S3/S4/S5 state. The options
are Enabled and Disabled.
USB Wake Up
This setting allows you to wake up the system from S3/S4 state. Make sure
to set the proper jumper fi rst for USB wake up. The options are Enabled and
Disabled.