SUPER MICRO Computer X7SBL-LN1/LN2 - Manual (Page 30)

2-12
X7SBL-LN1/LN2 User’s Manual
GLAN 1 LED
Pin Defi nitions (JF1)
Pin# Defi nition
11 LED_Anode+
12 NIC1 LED
Signal
Header Pins
NIC1/NIC2 LED Indicators
The NIC (Network Interface Control-
ler) LED connection for GLAN 1 is
located on pins 11 and 12 of JF1 and
the LED connection for GLAN 2 is on
Pins 9 and 10. Attach the NIC LED
cables to display network activity.
Refer to the table on the right for pin
defi nitions.
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. Attach the
hard drive LED cable here to display
disk activity (for any hard drives on the
system, including SAS, Serial ATA and
IDE, if available). See the table on the
right for pin defi nitions.
HDD LED
Pin Defi nitions (JF1)
Pin# Defi nition
13 +5V
14 HD Active
A. HDD LED
B. NIC1 LED
C. NIC2 LED
FP Power Button
OH/Fan Fail/
PWR Fail/UID LED
1
NIC1 LED
FP Reset Button
2
HDD LED
Power LED
Reset
PWR
Vcc
UID Switch/Vcc
Vcc
Blue_LED_Cathode
(UID)/Vcc
Ground
Ground
19 20
Vcc
X
Ground NMI
X
Vcc
PWR Fail LED
NIC2 LED
GLAN 2 LED
Pin Defi nitions (JF1)
Pin# Defi nition
9 LED_Anode+
10 NIC1 LED
Signal
C
B
A