SUPER MICRO Computer X7SBL-LN1/LN2 - Manual (Page 20)

2-2
X7SBL-LN1/LN2 User’s Manual
Note: Some components are very close to the mounting holes. Please take
precautionary measures to prevent damage to these components when install-
ing the motherboard to the chassis.
2-3 Processor and Heatsink Installation
Warning: When handling the processor package, avoid placing direct pres-
sure on the label area of the fan.
Notes:
1. Always connect the power cord last and always remove it before adding,
removing or changing any hardware components. Make sure that you install the
processor into the CPU LGA 775 socket before you install the CPU heatsink.
2. The Intel LGA 775 Processor package contains the CPU fan and heatsink
assembly. If you buy a CPU separately, make sure that you use only Intel-
certifi ed multi-directional heatsink and fan.
3. Make sure to install the motherboard into the chassis before you install the
CPU heatsink and fan.
4. When purchasing an LGA 775 Processor or when receiving a motherboard
with an LGA 775 Processor pre-installed, make sure that the CPU plastic cap
is in place and none of the CPU pins are bent; otherwise, contact the retailer
immediately.
5. Refer to the MB Features Section for more details on CPU support.
I nstallation Overview
For proper system setup, please fol-
low the following procedure:
Install the heatsink backplate 1.
into the chassis if needed.
Install the motherboard into the 2.
chassis.
Install the CPU onto the moth- 3.
erboard.
Install the heatsink and/or 4.
cooling fans (if any).
Connect the fan and power 5.
cables (if any).
!
Heatsink
CPU
CPU
Socket
Mother-
board
CPU Retention
Bracket (Pre-
Installed)
Backplate