SIGMA SD10 - Manual (Page 110)

110
WARNING DISPLAYS
COLOR LCD MONITOR MESSAGES
“No CF card in camera”
The camera can not detect a CF card.
►Please Insert the CF Card. (P.27)
“Incompatible file system. Format card.”
The CF card is corrupt or not formatted properly.
►Format CF card. If the error persists, replace with new card. (P.29)
“CF card is full!”
There is no more room on the CF card.
►Delete unwanted photos, choose a lower resolution setting, or use a different
card. (P.77~79)
“No images on CF card”
The ＜ VIEW＞ button has been pressed when there are no SD10 images on the
CF card.
►To review images, insert a card with valid SD10 images, capture new images
onto the card, or press ＜ VIEW＞ button again to turn off display.
“Error writing to CF card!”
There was an error writing to the CF card.
►Turn the camera off and back on. Verify that the card has not been corrupted by
pressing the ＜ VIEW＞ button. If the problem persists, call Technical Support.
An error has occurred! Error code # # #.
An error has occurred on the camera.
►Turn the camera off and back on. If the problem persists, call Technical Support
and give them the error number.
“CF card cover is open!
Do not remove CF card while the camera is on or busy light is flashing!”
The CF card slot cover has been opened.
►Close CF card cover immediately. The CF card cover should not be opened
while the camera is on.