SIGMA SD10 - Manual (Page 64)

64
CHANGING THE QUICK PREVIEW DURATION
TO CHANGE PREVIEW DURATION
1
Make sure the camera is turned on.
2
Press the ＜ MENU＞ button on the back of
the camera to display the Camera Set-up Menu.
(See P.96)
3
Use the
＜ ／ ＞
arrows on the 4-way
controller to select “Quick Preview”.
4
Press the
＜ ＞
arrow or
＜
OK＞ to open
sub-menu.
5
Use the ＜ ／ ＞ arrows on the 4-way
controller to select a duration.
6
Press the ＜ ＞ arrow or ＜
OK＞ to apply the
setting or the
＜ ＞
arrow or
＜
CANCEL＞
to close sub-menu without making any changes.
TIP
•
To manually turn off the Quick Preview image, press the ＜ CANCEL＞ button
or the shutter button half-way.
•
While the Quick Preview image is being displayed, the ＜ OK＞ button can
be used as a shortcut key to temporarily toggle the over-exposure warning
overlay on or off, or to mark, lock or rotate the image. (See P.90 to set OK key
shortcut.)
•
It will not be possible to zoom in to the preview image, use the Modify Menu, or
change to another image while the Quick Preview is up.
•
Pressing the ＜ VIEW ＞ button while the Quick Preview image is up
enables all image review features and overrides the Quick Preview time-out.