SIGMA SD10 - Manual (Page 114)

114
SPECIFICATIONS
Burst Rate
HI Mode: 1.9fps for 6 frames, MED Mode: 2.4fps for 14 frames,
LOW Mode: 2.5fps for 30frames
External Flash Synchronization Hot shoe (contact X, with dedicated flash linking contact)
LCD Monitor Type
1.8”, Color TFT LCD with appr. 130,000 dot low –temp.
polysilicon, Coverage Area : 100%, Backlight : White LED
Reviewing Images
Single-Image display, Zoom-in display,
9 segments thumbnail display, Slide Show
Language Japanese / English / French / Germany
Lithium CR(DL)123A x 2pcs.
Battery
Lithium CR-V3 x 2pcs or “AA” Ni-Mh x 4pcs or Nickel
Zinc Primary Battery x 4pcs
Power Source
AC Adapter
Dimensions 152mm / 6”(W) x 120mm / 4.72”(H) x 79mm / 3.1”(D)
Weight 785g / 25.2oz (without battery)
CONNECTING YOUR CAMERA TO A COMPUTER
The SD10 camera can be connected directly to a computer using the provided USB or
IEEE 1394 (FireWire
TM
) cable. Make sure that the camera is off before connecting it to
the computer. Data transfer rates will vary depending on the computer and operating
system used. The fastest transfer rates can be obtained using IEEE 1394. For further
information, please refer to the SIGMA Photo Pro User Guide, which is available in PDF
format on the supplied CD-ROM.
CONNECTING THE CABLES
USB Cable
z The shutter button and color LCD monitor will
be disabled while the camera is connected to
the computer via a USB cable.
z The camera will shut down after 15 minutes of
inactivity—no images being transferred—when
connected to the computer via a USB cable.
IEEE 1394 (FireWire™) Cable
z Connect the IEEE1394 (FireWire™) directly to
the computer please be sure that the other end
of the cable can be connected to the computer’s
IEEE 1394 terminal.
WARNING!!
•
Please use only the USB or IEEE 1394 cables supplied with your camera.
USB Terminal
IEEE1394 Terminal
(FireWire™)