SIGMA SD10 - Manual (Page 95)

95
CHANGING SLIDESHOW SETTINGS
You can customize slideshows by setting the length of time that images will be
displayed and specifying whether or not the slideshow will repeat itself
continuously.
SETTING OPTIONS DESCRIPTION
Duration
2 sec (default),
5 sec, 10 sec,
Manual
Set the length of time that each image in a
slideshow is displayed. (When set to “Manual”,
each image will remain on the screen until the
slideshow is manually advanced.)
Repeat Yes (default),
No Set whether the slideshow loops continuously or
stops on the last image.
TO CHANGE SLIDESHOW SETTINGS
1
Press ＜ MOD ＞ to display the Modification
Menu.
2
Use the ＜ ／ ＞ arrows on the 4-way controller
to select the Slideshow Menu.
3
Use the ＜ ／ ＞ arrows on the 4-way
controller to select “Settings…”.
4
Press ＜ OK＞ to open the slideshow set-up
page.
5
Use the ＜ ／ ＞ arrows on the 4-way
controller to select a setting and use the
＜ ／ ＞ arrows to cycle through the setting
options.
6
Once all changes have been made, press ＜ OK＞
to save the settings and return to the Slideshow
Menu.