SIGMA SD10 - Manual (Page 50)

50
SETTING THE WHITE BALANCE
WHITE BALANCE OPTIONS
OPTION COLOR TEMP. DESCRIPTION
Auto (Default)
 Select this setting to allow the camera to automatically
determine the appropriate white balance adjustments.
Sunlight Approx. 5400 K Select this setting when taking pictures in full sunlight.
Shade Approx. 8000 K Select this setting when taking pictures in the shade under
sunny skies.
Overcast Approx. 6000 K Select this setting when taking pictures under cloudy,
overcast skies.
Incandescent Approx. 3150 K Select this setting when taking pictures indoors under
incandescent (tungsten) lighting.
Fluorescent Approx. 4100 K Select this setting when taking pictures indoors under
fluorescent lighting.
Flash Approx. 5850 K Select this setting when taking pictures with the Sigma
EF-500 DG flash.
Custom
 Select this setting when using a custom white balance. Use
the "Set Custom WB" menu option to create a custom white
balance setting. The "Custom" option will not be available if
no custom white balance has been set.
1
Make sure the camera is turned on.
2
Press the
＜ MENU＞ button on the back of
the camera to display the Camera Set-up Menu.
(See P.96)
3
Use
＜ ／ ＞
arrows on the 4-way controller
to select “White Balance”.
4
Press
＜ ＞
arrow or
＜
OK ＞ to open
sub-menu.
5
Use
＜ ／ ＞
arrows on the 4-way controller
to select desired white balance setting.
6
Press ＜ ＞ arrow or ＜ OK ＞ to apply the
setting or
＜ ＞
arrow or
＜
CANCEL＞ to
close sub-menu without making any changes.