SIGMA SD10 - Manual (Page 26)

26
SETTING THE TIME AND DATE
The SD10 camera records the date and time when each image is captured and
stores this information with the image. To ensure that the correct information is
recorded with each image, set the camera’s internal clock to the correct date and time
before using the camera for the first time or after extended periods of disuse.
1
Make sure the camera is turned on.
2
Press the
＜ MENU＞
button on the back of
the camera to display the Camera Set-up Menu.
(See P.96)
3
Use the
＜ ／ ＞
arrows on the 4-way
controller to select “Date/Time…”.
4
Press the ＜ ＞ arrow or the＜ OK＞ to
open the date/time set-up page.
5
Use the ＜ ／ ＞ arrows on the 4-way
controller to select a setting and use the ＜ ／ ＞
arrows to cycle through the setting options.
6
Once all changes have been made, press ＜ OK＞
to save the settings and return to the main menu.
• Press ＜ CANCEL＞ at any time to close
the date/time set-up page without saving any of
the changes.
TIP
•
The date can be displayed in one of three formats: mm/dd/yyyy (month/day/year),
dd/mm/yyyy (day/month/year), or yyyy/mm/dd (year/month/day).
•
The camera’s internal clock is powered by a capacitor that receives its charge from
both sets of batteries. If the camera is without batteries for an extended period of
time, such as after prolonged storage, the internal clock will need to be reset.
•
You can synchronize the date and time on the SD10 camera to your computer by
using the “Set Date and Time…” option in the Camera menu of the SIGMA Photo
Pro software (See SIGMA Photo Pro Manual provided on the CD-ROM).