SIGMA SD10 - Manual (Page 20)

20
LOADING THE BATTERIES
„ When using the SD10 camera in a cold environment, we recommend you use of
CR-V3 battery, which is comparatively stronger against low temperature.
„ AA Type Batteries that can be used with SD10 Camera; Ni-Mh “Nickel-Metal
Hydride”, Nickel Zinc Primary Batteries.
„ This camera cannot be used for battery charging. Use only the recommended
chargers of the battery makers, when you use Ni-Mh “Nickel-Metal Hydride”
Batteries.
WARNING!!
•
Always use batteries of same type together. Do not mix battery types. Avoid
using the following battery combinations.
1. CR-3V and “AA” type battery combination.
2. Nickel Zinc Primary and Ni-Mh batteries, and other battery type
combinations.
3. Using the same type but different brands.
4. Do not mix the old batteries with new ones, replace them at the same time.
•
While CF Card busy light is on, please do not remove the batteries. Doing so can
result data loss. Moreover, Camera, CF card and Microdrive may be damaged.
TO REMOVE THE BATTERIES
When you remove the batteries from the battery case, please remove, as shown in
the illustration. Pulling up the lever, facilities removal.