Sony STORSTATION LIB-D81 - Manual (Page 36)

36
Chapter 4 Operating the AIT Autoloader
3
Eject the cartridge from the slot as illustrated below.
Caution
The AIT autoloader contains a large number of wires and parts. Do not
touch any part other than the slots inside the AIT autoloader as this may
lead to damage and/or injury.
Note
If the cartridge that you want to eject in the AIT drive, see “Transporting
the AIT Autoloader” (page 44) in the “Appendix”.
4
When you want to change cartridges, insert a new cartridge in the empty
slot.
Make sure that you insert cartridges in the right direction, and push them in
the AIT autoloader until you hear a click.
5
Close the front door.
When you hear the door click, it is closed. Make sure that the door clicks
when you close it.
When the door is completely closed, the cartridges that you inserted into
the AIT autoloader are counted and their number is displayed on the
message display.
Caution
If cartridges protrude from slots or are otherwise improperly inserted into
slots inside the AIT autoloader, the ERROR/WARNING LED lights
orange and [0 1] appears on the message display, indicating an error, and
the front door is automatically unlocked. Open the front door and correct
any problems as necessary.
AIT LIBRARY LIB-D81
CLEAN DOOR ERROR
CLEANING
WARNING