Sony STORSTATION LIB-D81 - Manual (Page 50)

50
Appendix
93
Cannot detect the RVS/FWD
sensors during the
initialization MOVE. [L ] and [9 3] appear
alternately on the message
display.
Yes
98
Failed cartridge pickup during
GET operation. (Cannot detect
the CTRG. sensor at the end
of the GET operation.) [L ] and [9 4] appear
alternately on the message
display.
Yes
99
Cannot clear the GAP during
the GAP clear operation when
retrying GET. [L ] and [9 9] appear
alternately on the message
display.
Yes
9A
Failed to detect RVS sensor
during elevator movement of
the GET operation. [L ] and [9 A] appear
alternately on the message
display.
Yes
9B
Failed to detect FWD sensor
during elevator movement of
the GET operation. [L ] and [9 B] appear
alternately on the message
display.
Yes
9C
Detected a GAP at the end of
the PUT operation. [L ] and [9 C] appear
alternately on the message
display.
Yes
9D
The pass sensor cannot
detect the cartridge at the end
of the PUT operation. [L ] and [9 D] appear
alternately on the message
display.
Yes
9E
Failed to detect RVS sensor
during elevator movement of
the PUT operation. [L ] and [9 E] appear
alternately on the message
display.
Yes
9F
Failed to detect FWD sensor
during elevator movement of
the PUT operation. [L ] and [9 F] appear
alternately on the message
display.
Yes
A0
Detected an empty slot. [L ] and [A 0] appear
alternately on the message
display.
Yes
A1
Cannot perform the GET
operation because the picker
contains a cartridge. [L ] and [A 1] appear
alternately on the message
display.
Yes
A2
Detected that all slots are
occupied. [L ] and [A 2] appear
alternately on the message
display.
Yes
A3
Cannot perform the PUT
operation because the picker
does not contain a cartridge. [L ] and [A 3] appear
alternately on the message
display.
Yes
A4
The picker made a GET
operation request while in the
RVS position. [L ] and [A 4] appear
alternately on the message
display.
Yes
A7
Detected a sensor anomaly.
(GAP, cartridge, or pass.) [L ] and [A 7] appear
alternately on the message
display.
Yes
A8
Detected a drive hardware
error. [L ] and [A 8] appear
alternately on the message
display.
Yes
A9
Detected a drive medium
error. [L ] and [A 9] appear
alternately on the message
display.
Yes
AA
Drive did not enter MOUNT
state after a lapse of three
seconds during the PUT
operation. [L ] and [A A] appear
alternately on the message
display.
Yes
Error code Description Display Logged