Place the disk drive on an antistatic mat – Sun Microsystems SUN FIRE 280R User Manual
Page 151
Advertising
Chapter 5
Using and Servicing Internal Storage Devices
123
4. Using your thumb and forefinger, pinch the disk drive latch sideways to release
the drive handle.
Pull the handle away from the drive until you feel the drive connector disengage
from the backplane connector.
5. Holding the disk drive by the handle, slide it out of the drive bay.
Note –
When you reinstall the drive (or a replacement drive), be sure to install it
into the same drive bay as the one from which it was just removed.
6. Place the disk drive on an antistatic mat.
Disk drive handle
Advertising