Align the disk drive to its drive bay – Sun Microsystems SUN FIRE 280R User Manual
Page 154
Advertising
126
Sun Fire 280R Server Owner’s Guide • January 2001
4. Align the disk drive to its drive bay.
Orient the drive so that the drive handle’s hinge faces the outside of the drive bay.
Note –
If you are replacing a drive that you removed previously, be sure to install
the drive in the same drive bay from which it was removed.
5. Holding the drive by its handle, fit the drive into the drive bay guide rails.
6. Slide the drive into the bay until it barely contacts the backplane.
Disk drive handle
Advertising