Sun Microsystems SUN FIRE 280R - Manual (Page 88)

60 Sun Fire 280R Server Owner’s Guide • January 2001
Note – Because the operating system is only in volatile memory, it is not retained
across power cycles.
b. To install the operating system onto the server’s internal system disk, type:
Note – The boot net - install command assumes a network boot server is set up
with appropriate properties defined to allow auto-installation of the operating
environment on the internal system disk.
Both commands boot the system, and the system console displays the system
prompt.
What Next
If you want to use the main logic board Ethernet interface as the default boot device,
you must change the value of certain OpenBoot parameters. For more information,
see the OpenBoot Command Reference Manual in the Solaris System Administrator
AnswerBook for your specific Solaris release.
ok boot net - install