Siemens 2010 Tango User Manual
Page 12
Stepwise start-up
2
kap02.fm5
18.7.99
Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Step 3: Connecting the base station
Phone cord
Insert the RJ-11 plug on your phone cord into the base
station. The jack on the bottom of the base station is
marked with the following symbol:
Insert the phone plug on your phone cord into your phone
socket.
Power cord
Insert the RJ-11 plug on your power cord into the base
station. The jack on the bottom of the base station is
marked with the following symbol:
Insert the power cord plug-power supply into a 220/230V
socket (C39280-Z4-C59) or a 110/120V socket (C39280-Z4-
C69).
phone cord
power cord RJ-11 plug
Plug-in power supply
and 220/230V
or 110/120V socket
Underside of base
station case
power cord RJ-11 plug
power cord
cord channel for
power and phone
cords
For safety reasons, the phone must only be op-
erated with the supplied Siemens adapter
C39280-Z4-C59 for 220/230V or
C39280-Z4-C69 for 110/120V.