Siemens 2010 Tango - Manual (Page 62)

Operation at more than one base station
52
kap17.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Activating/deactivating base station number display on handset
You can program your handset to display the base
station with which the unit has radio contact.
Selecting the best station
Normally, radio contact is automatically re-established if
you move your handset from one base station radio area
to another. If problems occur, you can select the best sta-
tion. This is the station to which your handset can set up
the best radio connection.
station
B 3 6 Start the setting procedure. The current setting is
displayed:
36 1 = activated, 36 0 = deactivated.
1
B Activate the base station number display.
or
0 B Deactivate the base station number display (factory
setting).
When the display is activated, the number of the base
station is displayed continuously:
:
-1-
f
N
(Example: handset is linked
to base station number 1)
B ü
0 Start the setting procedure. The numbers of the base sta-
tions at which the handset is registered are displayed.
B
Select best base station.
The best base station is displayed.
0 1 2
P
f
N
(Example: base stations
1 and2 are displayed)
- 2 -
P
f
N
(Example: base stations
with no. 2 are selected)