Siemens 2010 Tango - Manual (Page 19)

Notes on operation
9
kap03.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Technical data
Standard: DECT, GAP
Number of channels: 120 duplex channels
Radio frequency range: 1910 MHz to 1930 MHz
Duplex method: Time-division multiplexing, 10 ms frame length
Channel grid: 1728 kHz
Bit rate: 1152 kbit/s
Modulation: GFSK
Voice coding: 32 kbit/s
Transmitted power: 10 mW, average output per channel
Range: up to 300 m outdoors, up to 50 m in buildings
Base station power supply: 230V + 6% - 15% (C39280-Z4-C59 AC adapter)
120V + 10% - 10% (C39280-Z4-C69 AC adapter)
Base station power consumption: In stand-by mode and when the telephone is in use ap-
prox. 3 W, during charging approx. 5 W
Handset operating times
(with fully charged battery):
NiCd
NiMH, 1100 mAh
NiMH, 1300 mAh
Stand-by
up to 70 hours
up to 110 hours
up to 130 hours
In use
up to 7 hours
up to 11 hours
up to 13 hours
Charging time in base station: approx. 4–5 hours (NiCd)
approx. 8–9 hours (NiMH, 1100 mAh)
Permitted ambient conditions
for operation:
+5 °C to +45 °C
20 % to 75 % relative humidity
Signalling method: DP (dial pulsing) / DTMF (dual tone multifrequency)
Signal key function: Programmable, flash 100 ms (default)
Base station dimensions: approx. 146 x 117 x 70 mm (L x W x H)
Handset dimensions: approx. 160 Ч 55 Ч 25 mm (L × W × H)
Weight: Base station 210 g
Handset with rechargeable batteries approx. 165 g
Cable lengths: Telephone connecting cord approx. 3 m
Power cord approx. 3 m
Plugs: TSV 6/4 (phone cord)
European plug (C39280-Z4-C59 AC adapter)
US flat plug (C39280-Z4-C69 AC adapter)