Siemens 2010 Tango - Manual (Page 39)

Collective ringing and internal calls
29
kap07.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Checking your own internal number
Allowing internal parties to listen in on a call
It is possible to enable an internal party to listen in on a
call with an external party from his/her handset.
Precondition: An external connection must be already
set up.
Disconnect internal party again
Ending an internal call
I Press the internal key.
The internal call number
of the handset from
which you are calling is
shown on the display.
1
f
N
b
G
c An external connection is already set up.
I
o
Press the internal key. Dial the internal party (1... 6). An ex-
ternal call is under way. The internal party answers. Hold
your conversation.
BR The external call is resumed and the internal party can
listen in.
BR The internal party is disconnected and hears the busy
tone.
or
a The internal party hangs up by pressing the on-hook key.
Replace the handset in the base station or charging unit.
The line is disconnected.
or
a
Disconnect line (“on-hook“).