Siemens 2010 Tango - Manual (Page 24)

Operating modes
14
kap04.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Switching on the handset
When the handset is in protected mode:
When the handset is switched off:
Switching off the handset
h
Press the handset key briefly. You will hear the positive
confirmation beep. The following message appears on
the display when the handset is switched on:
:
f
N
h
Press the handset key briefly. You will hear the positive
confirmation beep. The display flashes. Wait until it stops
flashing. The handset is switched on.
or
Place the handset back into the base station. The mes-
sage appears on the display. The handset is switched on.
h
Press the handset key until the display message is
cleared. You will hear the positive confirmation beep.