Siemens 2010 Tango - Manual (Page 33)

Incoming calls
23
kap05.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
External call-waiting during internal calls
If you are on an internal call with a second handset and a
external call arrives, this is indicated by the call-waiting
function. Your internal call is terminated when you accept
the external call.
The arrival of the external call is indicated.
Ending an internal call
Switching off the microphone (mute function)
It is possible to switch the microphone off during external
calls. This allows you to consult other people in the room
while the external party is on hold. The external party can-
not hear what you are saying and will hear music.
BR You accept the call immediately.
or
a Disconnect the internal call. You will hear the ring tone.
c Accept the external call.
Replace the handset in the base station or charging unit.
The line is disconnected.
or
a Disconnect (“on-hook“).
If the handset was in protected mode, it re-
mains in this mode after you press a .
I Press the internal key. The microphone is switched off.
Hold consultation with people in the room. The external
party will hear music.
R Switch the microphone back on. You are reconnected
with the external party.