Siemens 2010 Tango - Manual (Page 18)

Notes on operation
8
kap03.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Mounting the carrying clip onto the handset
If required, you can mount the carrying clip supplied with
the handset, e.g. if you wish to carry the handset in your
pocket.
Hold the handset with the keypad facing the palm of your
hand. You will see two small holes on the sides, level with
the display. Place the clip in one hole and then insert it
into the opposite hole until it clicks into place.
Maintenance notes
Simply wipe the handset and base station with a damp
cloth or an antistatic wipe.
Connecting the telephone socket
Only use a Siemens telephone connecting cable. Cables
by other manufacturers may have a different pin assign-
ment.
The telephone cable socket is connected on the under-
side of the base station as follows:
Never use a dry cloth as this causes static dis-
charge.
3
2
1 4
5
6
1
2
3
4
5
6
Free
Free
a
b
Free
Free