Siemens 2010 Tango - Manual (Page 63)

Operation at more than one base station
53
kap17.fm5 18.7.99 Gigaset 2010, LAM/engl.: A30852-X1100-B313-1-7619
Setting the preferred station
We recommend that you define a preferred base station
if the handset is located in an overlap area between two
or more base station radio areas. This means you no long-
er need to change stations frequently.
There are two ways of setting the preferred station:
● you can specify a base station at which the handset
should operate permanently ("fixed"). This prevents
automatic change to other base stations,
or
● you specify a station at which the handset should "pre
ferably" operate. In this case, the handset searches
for the preferred station. A connection is only set up
to another station (the best station) if the preferred
station is not found (within 30 s).
Selecting the fixed station
Searching for the preferred station
B ü Start the setting procedure. The numbers of the base sta-
tions at which the handset is registered are displayed.
:
o B
Enter the number of the fixed base station and
confirm with B .
0 1 2
P f
N
(Example: base station
1 and2 are displayed)
B ü Start the setting procedure. The numbers of the base sta-
tions at which the handset is registered are displayed.
oo
B
Enter twice the base station number of the preferred
base station and confirm with B .
0 1 2
P
f
N
(Example: base stations
1 and2 are displayed)