Sharp FO-DC500 - Manual (Page 131)

Printing from a Computer
129
4. Netw
or
k
Pr
inter
Canceling a print job
Follow the steps below to cancel a print job.
♦
If there is a problem with a print job that is sent to the machine (for
example, the machine does not have the paper size specified for the job)
the ALARM light on the machine will come on. When this happens, you can
either cancel the job, or continue the job in spite of the problem.
Canceling a print job
1
Press twice to display the NETWORK PRINT STATUS screen.
2
Press once to switch the machine off-line.
3
Press .
4
Press to select YES.
JOB STATUS
ON LINE
STOP
1
Continuing a print job when the ALARM light is on
Note: If the ALARM light has come on because the machine does not have
the size of paper specified for the job and you continue the job anyway, the job
will be printed on a different size of paper.
1
Press twice to display the NETWORK PRINT STATUS screen.
2
Press .
3
Press to select YES.
JOB STATUS
START/
ENTER
1