Sharp FO-DC500 - Manual (Page 47)

Sending a Fax by Automatic Dialing
45
2.
Send/Receiv
e
Documents
Sending a Fax by Automatic Dialing
Dual Access
The machine features full dual access, which means that you can load a
document and dial by automatic dialing even when the machine is occupied
with another job. After you dial, your document will be immediately scanned
into memory and then transmitted once all previously stored jobs have been
completed.
If more than one document has been scanned into memory for transmission,
the documents (jobs) will be transmitted in the order in which they were
scanned. If you have an urgent transmission and do not want to wait until
previously stored jobs are completed, you can press after loading
your document. Your document will be transmitted immediately after the
current job is finished.
If you don’t want the document to be transmitted from memory, you can press
after loading the document. Your machine will call the receving fax
machine immediately after the current job is finished (ahead of any previously
stored jobs in memory), and the document will be scanned as soon as the
connection is established.
♦
The FO-DC500 can hold approximately 500 pages of average content in
memory. The FO-DC600 can hold approximately 1,000 pages. Less pages
can be held if any were scanned using fine, super fine, ultra fine, or halftone
resolution.
♦
The amount of memory currently occupied appears as a percentage
("M:00%") in the display.
PRIORITY
DOCUMENT
M/?