Sharp FO-DC500 - Manual (Page 165)

Timer Operations
163
6. Special Functions
9
Press .
START/
ENTER
Canceling a timer operation
If you need to cancel a timer operation before it is performed, follow the steps
below.
♦
You will need to know the number assigned to the operation in order to
cancel it. If you don’t remember the number (it appears in the display when
you set the operation), print out the Timer List. (See page 200.)
1
Press (flip up the Rapid Key
overlay if it is down) and then or
to select “CLEAR“.
2
Press .
3
Enter the 2-digit number assigned to the operation.
4
Press .
5
Press repeatedly until you return to the date and time display.
TIMER
X/>
START/
ENTER
START/
ENTER
STOP
Display:
TIMER MODE
1=SET
2=CLEAR