Sharp FO-DC500 - Manual (Page 179)

Print Hold
177
5. Spe
c
ial
Functions
Print Hold
The Print Hold function is used to hold all received faxes in memory instead of
immediately printing them out. To print the faxes, the programmed Print Hold
code must be entered.
To use the Print Hold function, program a Print Hold code and then turn on the
Print Hold function as explained in the following sections.
Programming the Print Hold code
Follow the steps below to program a Print Hold code.
1
Press and then .
•
Make sure that PRINT HOLD is
selected in the display.
2
Press and then or
until PRINT HOLD CODE SET is
selected.
3
Press .
4
Press the numeric keys to enter the desired Print Hold code (4 digits).
5
Press .
•
The machine will print out the Print Hold code for your records.
•
In the event that you forget the code and have kept no record, contact your
Sharp dealer.
MENU
START/
ENTER
START/
ENTER
START/
ENTER
Display:
MENU MODE
6:SERIAL POLLING MODE
7:MEMORY POLL MODE
8:NETWORK SETTING
9: PRINT HOLD
PRINT HOLD
1:PRINT HOLD DATA PRINT
2:PRINT HOLD CODE SET
3:PRINT HOLD CODE CLEAR