Sharp FO-DC500 - Manual (Page 159)

Polling
157
6. Special Functions
1
Press and then or
until ENTRY MODE is selected in the
display.
2
Press and then or
until ID # MODE is selected.
3
Press . Make sure that “SET” is
selected.
(To clear a number, select “CLEAR”.)
4
Press .
5
Storing: Enter a number from 1 to 5. This number identifies the ID
number you will enter in the next step.
Clearing: Enter the number which identifies the ID number you want to
clear, and go to Step 7.
6
Enter the ID number (4 digits) by pressing the numeric keys.
7
Press .
8
Return to Step 3 to enter (or clear) another number, or press
repeatedly to return to the date and time display.
MENU
START/
ENTER
START/
ENTER
START/
ENTER
START/
ENTER
STOP
Storing and clearing ID numbers for polling permission
Up to five 4-digit ID numbers can be programmed in your machine for giving
and receiving polling permission. Polling will take place if one of your ID
numbers matches the other fax machine’s System number.
Display:
MENU MODE
1:RECEIVE MODE
2:LISTING MODE
3:ENTRY MODE
04:DATE&TIME SET
05:DAY LIGHT SAVING
06:ID # MODE
ID # MODE
1=SET
2=CLEAR