Sharp FO-DC500 - Manual (Page 134)

Printer Driver Settings
132
Paper Source
Select the paper source to be used. When Auto Select is selected, the
source which contains the same size of paper as the paper size setting is
automatically selected. If a specific source is selected, paper is drawn from
that source regardless of the paper size setting.
Limitation:
The Paper Source selections that appear are determined by the Input Option
setting in the Options tab. When the Input Option setting is Tray only,
Cassette 1 and Cassette 2 are not available. When the Input Option setting
is Tray + Cassette, Cassette 2 is not available.
Scaling
Scaling allows you resize an image on the paper.
Limitation:
When one of following is selected, Scaling can not be selected.
N-Up: Any setting except Off
Fit to Paper: On
All Raster: On
Copies
Use this box to specify the number of copies (from 1 to 99).
Collate at Printer
Select On if you want copies of each page to be printed in collated sets
(1,2,3,·1,2,3,· 1,2,3,·...).
Select Off if you want copies of each page to be printed together (1,1,1,·
2,2,2,· 3,3,3,·...).
Note: On can only be selected when a number greater than “1” is selected for
the Copies setting.