Sharp FO-DC500 - Manual (Page 138)

136
5. Making Copies
Your machine can also be used to make copies. Single and multiple copies
(up to 99 per original) can be made, enabling the machine to double as an
office copier.
♦
You can perform all steps of a copy job even when the machine is busy
printing other copy jobs, or when it is printing a received fax after the line
has been disconnected. Your copy job will be automatically stored in
memory and then printed when all previous printing jobs are completed.
♦
The default resolution for copying is FINE. If desired, you can change the
default resolution to SUPER FINE or ULTRA FINE by changing Option
Setting 30 (see page 197).
1
Load the document.
•
SEND READY will appear in the
display.
•
Press and/or to
set the resolution and contrast if
needed.
2
Press .
•
If you are only making a single copy of
the original (or of each original), press
. Copying will begin.
3
Enter the desired number of copies per
original with the numeric keys.
•
If the desired number of copies is from
1 to 9, enter “0” first.
RESOLUTION CONTRAST
COPY/HELP
START/
ENTER
Display:
COPY MODE
ENTER #(01-99) 01
MULTI/SORT COPY MODE
1 = MULTI
2 = SORT