Sony SNC-P5 - Manual (Page 19)

O
per
at
ing
t
he
Came
ra
Configuration of Main Viewer
19
Zoom control
Press
to zoom out, and press to zoom in.
Zooming continues while the button remains pressed.
Trigger
(Displayed only when the camera Viewer mode
(page 46) is set to Full and one or more triggers are
enabled on the Trigger Setting menu (page 59).)
Select the function you want to use from the list box and
click the icon. Then you can send the monitor image of
the camera to an FTP server (page 24), send it attached
to a mail (page 24), record the image on the memory
(page 25), switch the Alarm out to On/Off (page 25) and
start the One time tour.
Transmission (Switching the TCP/
UDP transmission mode)
(Displayed only when the camera Video mode (page 37)
is set to MPEG4 and you are using the ActiveX viewer.)
Each click switches the transmission mode of the video/
audio data among TCP mode, UDP (Unicast) mode and
UDP (Multicast) mode. (page 26)
The last selected mode is saved in the computer, and it
will be selected at the next starting.
(Volume)
(Displayed when the Microphone (page 38) is set to
On.)
Drag the bar of
icon to adjust the volume.
When you click icon, the icon changes to and
the audio output stops. To output the audio, click
again.
Note
If the volume icon is not displayed in the case you are
using Java applet viewer, Audio codec may not be set
G.711(64kbps) (page 38) or Java may not be installed
correctly.
To check if Java is installed correctly, refer to “Java
applet viewer” of “About Viewers” on page 16.
Monitor Image
The image shot by the camera is shown here. Date and
time is displayed at the top of the window.