Sony SNC-P5 - Manual (Page 54)

A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory setting Menu
54
displays in the below. If you do not use it, select Off and
click OK.
Built-in memory
It displays the free spaces of the built-in memory you
can write in at present.
A-slot
It displays the free spaces of the CF memory card you
can write in at present.
Selected root directory
Select a memory in which you want to save an image.
Built-in memory: built-in memory of this camera
(approximately 8 MB)
A-slot: CF memory card inserted into the slot in the
front side of the camera
Overwrite
Select to overwrite the file or not when there is
insufficient memory space to record the image.
Select On to allow overwriting. The oldest file or folder
is overwritten first.
Select Off to prohibit overwriting. In this case, a new file
cannot be stored.
Capacity warning
Select On to send a warning mail to the Administrator
when the built-in memory space is low or the memory is
full. Select Off if you do not want to send a warning
mail.
Note
When the Overwrite is set to On, a warning mail is not
sent to the Administrator.
SMTP server name
Type the name of the SMTP server you want to use for
sending the warning mail, up to 64 characters.
Otherwise type the IP address of SMTP mail server.
Authentication
Select the authentication required when you send an
alarm mail.
Off: Select if no authentication is necessary when an e-
mail is sent.
On: When authentication is necessary an e-mail is sent,
select one of the authentication methods from the
followings.
SMTP: Select if SMTP authentication is necessary
when an e-mail is sent.
POP before SMTP: Select if POP before SMTP
authentication is necessary when an e-mail is
sent.
Note
When you set to On, be sure to select either or both
SMTP or/and POP before SMTP.
POP server name
This is necessary when POP before SMTP is selected
in Authentication.
Type POP (receiving mail) server name up to 64
characters. Otherwise type the IP address of POP server.
This setting is necessary when SMTP server that sends a
mail authenticates using the account of POP user.
User name, password
Type the user name and the password of the user who
has the mail account. This setting is necessary when
SMTP server that sends a mail authenticates.
Administrator e-mail address
Type the E-mail address of the recipient of the warning
mail (E-mail address of the camera Administrator), up to
64 characters.
OK/Cancel
See “Buttons common to every setting menu” on page
31.
Alarm recording Tab — Setting the
Image Memory Function when
Detecting the Alarm
You can set to record the image and audio file to the
memory linked with the external sensor input or with the
built-in motion detection function.